NumUtility

Conversions

How Many Teaspoons Are in a Tablespoon?

One US customary tablespoon equals exactly 3 US customary teaspoons. A 20 mL Australian tablespoon equals 4 teaspoons when each teaspoon holds 5 mL.

Published 2026-11-18 · Updated 2026-11-18 · 6 min read

The US tablespoon-to-teaspoon rule

Use 3 teaspoons for every tablespoon when both measures are US customary. Multiply tablespoons by 3 to get teaspoons. Divide teaspoons by 3 to get tablespoons. That means 6 teaspoons is 2 tablespoons, and 2 teaspoons is 2/3 tablespoon.

Recipe abbreviations can be easy to misread. Tbsp means tablespoon and tsp means teaspoon. In the US customary system, swapping them changes the amount by a factor of three. Rewrite an unclear handwritten amount with the unit spelled out before measuring.

Section source: NIST Handbook 44 (2024) — Appendix C

Tablespoons to teaspoons conversion chart

Use the fractions in the chart to select spoons you own. For example, 1 1/2 teaspoons can be measured with a one-teaspoon spoon followed by a half-teaspoon spoon. For 3/4 teaspoon, use a half teaspoon and a quarter teaspoon. This is more reproducible than estimating a partial fill of the tablespoon.

US customary tablespoons to teaspoons

Tablespoons Teaspoons
1/4 3/4
1/3 1
1/2 1 1/2
2/3 2
1 3
1 1/2 4 1/2
2 6
3 9

For a 20 mL Australian tablespoon and 5 mL teaspoon, multiply by four instead.

How to scale a spoon measurement

A sauce uses 1 1/2 tablespoons of vinegar for six servings. For two servings, first convert 1 1/2 tablespoons to 4 1/2 teaspoons. Divide by three to get 1 1/2 teaspoons. Measure that with a one-teaspoon spoon and a half-teaspoon spoon.

Worked example for two servings

For a reverse conversion, suppose you have measured 10 US teaspoons of broth and want to repeat that amount with fewer pours. Three tablespoons account for 9 teaspoons. Add one more teaspoon to reach 10.

When regional spoons have different capacities

A US customary tablespoon holds about 14.7868 mL and its teaspoon about 4.9289 mL. A 15 mL metric tablespoon and a 5 mL metric teaspoon also have a 3-to-1 ratio. These are different capacities with the same ratio. The FDA nutrition-label convention also uses 15 mL and 5 mL respectively.

Some Australian recipes use a 20 mL tablespoon and a 5 mL teaspoon. Divide 20 by 5 to get four. Three full 5 mL teaspoons would give 15 mL, leaving 5 mL short for each tablespoon called for in that recipe. For mixed systems, convert the source spoon amount to milliliters and divide by the capacity of your target spoon.

Check etched unit markings when a recipe comes from another region. Use the Cooking Measurement Converter for the spoon sizes shown on your tools. If you are replacing larger quantities, the related ounces-in-a-cup and cups-in-a-quart guides help you measure most of the amount in a jug and use spoons for the remainder.

Section sources: NIST Handbook 44 · NIST Metric Kitchen · FDA — Household Measures · Donna Hay — Australian Recipe Measurements

Convert mixed spoon systems through milliliters

Imagine an Australian dressing calls for 1 1/2 tablespoons of vinegar and defines its tablespoon as 20 mL. Multiply 1.5 by 20 to get 30 mL. A 5 mL spoon measures that in six fills. With US customary teaspoons the arithmetic is 30 ÷ 4.9289, or about 6.09 teaspoons. A jug marked at 30 mL gives you a more practical target than trying to eyeball nine hundredths of a teaspoon.

For the opposite direction, two US customary teaspoons hold about 9.858 mL. Divide that by 20 to get approximately 0.493 Australian tablespoons. If a recipe is sensitive to small changes and includes values in milliliters, follow those values. If a recipe lists only spoon units, look for a measurement note or a separate equivalency chart from the publisher before converting.

Measure small amounts consistently

For 1/6 of a US tablespoon, multiplying by three gives 1/2 teaspoon. For 1/12 of a tablespoon, use a 1/4-teaspoon spoon. These fractions turn up when you divide a recipe originally written for a larger batch. Calculate the scaled amount first, then pick the nearest exact combination your spoons can make.

If you have a half-teaspoon spoon and need 3/4 teaspoon, check the rest of the set for a quarter-teaspoon measure. Three quarter-teaspoon fills also reach the target. A shallow teaspoon filled roughly three quarters of the way by eye may give a different result each time, especially with uneven crystals or a dark liquid that makes the fill level hard to see.

Use the same leveling technique for each spoonful of a dry ingredient. A flat edge can remove the extra mound from a filled spoon. For a liquid, keep the spoon horizontal as you fill it, and measure into a separate small vessel when an overpour would be difficult to remove. These steps matter when the ingredient is strong enough that a small extra amount changes the taste.

If a condensed recipe has ambiguous capitalization or handwriting, confirm the amount against a clearer copy. A note saying 1 T in one recipe might be easy to confuse with 1 t when copied. Spell out the units in your own notes and keep the scaled quantity beside the original so you can check the ratio next time.

Frequently asked questions

Do level and heaped teaspoons convert the same way?

Use level measures for the stated volume. A heap extends beyond the spoon and has no fixed volume.

Can I use this chart to convert teaspoons of salt to grams?

The chart converts volume. For grams, weigh the salt or use a documented density for the specific grind and product.

How can I check an unfamiliar spoon set?

Look for an mL mark or the manufacturer's stated capacity. If the units are unclear, use a marked set with the recipe's stated convention.

What should I do when scaling gives less than my smallest spoon?

Check whether the author supplies a weight and whether your scale can measure it. For a seasoning you can adjust to taste, start with a small amount and record what you use. For a formula that calls for a precise amount, use a smaller marked spoon or select a batch size you can measure.

Sources