NumUtility

Conversions

How Many Tablespoons Are in a Cup?

One US customary cup equals exactly 16 US customary tablespoons. Half a cup is 8 tablespoons, a quarter is 4, and a third is 5 tablespoons plus 1 teaspoon.

Published 2026-11-18 · Updated 2026-11-18 · 6 min read

US customary cups and tablespoons

A US customary cup holds 8 US fluid ounces. Each US customary tablespoon holds half a US fluid ounce, so 8 ÷ 0.5 = 16 tablespoons. This ratio applies to volume whether the cup contains oil or flour. For flour measured by volume, fill and level the spoon in the same way each time. Packing a dry ingredient can change the amount by weight even when the volume is unchanged.

Section source: NIST Handbook 44 (2024) — Appendix C

Cups to tablespoons conversion chart

The table uses US customary cups, tablespoons, and teaspoons throughout. For quantities that produce a fraction of a tablespoon, the last column gives a practical combination of marked spoons. In particular, 1/3 cup is 16/3 tablespoons, and the leftover 1/3 tablespoon is exactly one teaspoon.

US customary cup fractions in tablespoons

Cups Tablespoons Measuring spoons
1/8 2 2 tbsp
1/4 4 4 tbsp
1/3 5 1/3 5 tbsp + 1 tsp
1/2 8 8 tbsp
2/3 10 2/3 10 tbsp + 2 tsp
3/4 12 12 tbsp
1 16 16 tbsp

These are exact relationships within US customary volume units.

How to convert cups to tablespoons

Multiply cups by 16 to find tablespoons. Divide tablespoons by 16 to get cups. For a mixed amount such as 1 1/4 cups, treat the whole cup and the quarter separately if that is easier to measure. The result is 16 + 4 = 20 tablespoons.

Worked example for half a batch

If you are halving a dressing that uses 1/3 cup of oil, the new amount is 1/6 cup. Multiply 1/6 by 16 to get 2 2/3 tablespoons. Use two tablespoons and two teaspoons. This avoids rounding to three tablespoons and changing the oil-to-vinegar ratio.

For larger or repeated quantities, a marked cup or jug usually takes fewer pours. If your recipe gives a milliliter amount too, you can measure to that mark and skip the spoon count.

US customary, nutrition-label, metric, and Australian measures

The customary cup is about 236.588 mL and the customary tablespoon is about 14.7868 mL. NIST Metric Kitchen gives practical equivalents of 240 mL and 15 mL. The FDA uses those same numbers as defined units for its nutrition-label context. Both pairs yield 16 tablespoons per cup, but the volumes differ.

A 250 mL metric cup divided by a 15 mL metric tablespoon gives 16 2/3 tablespoons. Divided by a 20 mL Australian tablespoon, it gives 12 1/2 tablespoons. If a recipe calls for a 250 mL cup and you have a US spoon set, use the milliliter mark on a jug or select the two specific unit conventions in the cooking converter.

If you also need fluid ounces, use the related cup guide to identify the correct fluid-ounce system. For batches measured in quarts, convert the recipe to cups first, then use spoons for the small remainder.

Section sources: NIST Handbook 44 · NIST Metric Kitchen · FDA — Household Measures · Donna Hay — Australian Recipe Measurements

Choose the shortest combination you can measure accurately

Suppose a marinade uses 3/8 cup of water. One eighth of a cup holds 2 tablespoons, so three eighths holds 6. If your set has a quarter-cup scoop and a tablespoon, use the scoop once and the spoon twice. If it has a half-cup scoop with an eighth-cup line, check that you are reading the liquid at eye level before deciding which tool is easier to use.

For 7/8 cup, seven eighths times 16 is 14 tablespoons. When you have a half-cup measure and a quarter-cup measure, those two scoops provide 12 tablespoons together. Add 2 tablespoons to finish. Dividing the amount this way keeps you from having to count the same fill fourteen times.

To work backward, suppose you kept a record of 11 tablespoons of broth. Eight tablespoons make 1/2 cup, leaving 3 tablespoons. If a recipe editor needs one fraction rather than a combination of measures, divide 11 by 16 and record 11/16 cup. Keep the spoon combination on your kitchen copy if your jug has no mark for that fraction.

Plan the measurement around the ingredient

For a batter that calls for 1/4 cup of flour, the volume equivalent is 4 tablespoons. Spoon flour gently into a measure and level the top if the recipe calls for spooned and leveled flour. If the author specifies a different method, follow it consistently. If the recipe includes a target in grams, a scale is the more direct way to reproduce that amount.

For a sticky ingredient like honey, smaller measures can leave residue on every spoon. Use a marked cup for the main amount if you have one, and scrape each spoon into the bowl when adding a remainder. For oil or water, hold a spoon level over a small bowl so an accidental spill lands outside the mixing bowl. You can then add the measured amount to your recipe.

Write down any change in units before starting a batch. For example, if you are tripling 1/4 cup of lemon juice, calculate 3 × 4 = 12 tablespoons first. A 3/4-cup measure or a jug with that line lets you make the same batch in one pour. Doing the arithmetic at the start also avoids scaling one ingredient twice while you work.

Frequently asked questions

Can I measure a third of a cup with a quarter-cup scoop?

Yes. Start with 1/4 cup, then add 1 US tablespoon and 1 US teaspoon. That adds the missing 1/12 cup.

Is a tablespoon from my silverware drawer a tablespoon measure?

Check the capacity first. Use a measuring spoon with a stated volume when a small difference would affect the recipe.

Why does my measuring jug say 240 mL for one cup?

It may use the labeled or rounded kitchen convention. Choose the unit stated by the recipe or use that recipe's own milliliter amount.

What if a recipe calls for a scant cup?

A scant cup means slightly less than a full cup, with no specified amount to subtract. Start from that recipe's cup convention and follow its guidance on the finished mixture. If the recipe gives a weight or milliliter value, use that to repeat the result.

Sources