Running Pace Calculator
Calculate running pace, finish time, or distance. View pace per mile and per kilometer and plan even splits for a target distance.
Group: Health · 6 min read
| Split | Cumulative | Remaining |
|---|
What it solves
Two modes, because running questions come in two shapes. If you have run a distance and know the time, you want the pace. If you know the pace you can hold and want a finish time, you want the other direction.
Both modes report the pace per kilometre and per mile, because race distances are quoted in one unit and pace is often trained in the other. Under the result, an even-split table shows the cumulative time at each unit, so you can see what the halfway point should read on a watch.
Pace, speed and finish time
The three are the same fact written three ways:
- Pace = time ÷ distance, usually in minutes and seconds per kilometre or per mile.
- Speed = distance ÷ time, in km/h or mph.
- Finish time = pace × distance.
Because pace is time per distance and speed is distance per time, they run in opposite directions: a faster runner has a smaller pace and a larger speed. Mixing the two when comparing runs is the usual reason a conclusion about progress comes out backwards.
Worked examples
10 km in 50:00. The pace is 5:00 per kilometre. Per mile it is about 8:03, because a mile is 1.609344 km and 5:00 × 1.609344 = 8:03.
Half marathon at 5:30 per kilometre. A half marathon is 21.0975 km, so the finish time is 21.0975 × 5:30, which is about 1:56:00. Reading that off a table by eye is where people usually lose a minute or two.
A 5k goal of 25:00. That is 5:00 per kilometre, or about 8:03 per mile. If a training plan is written in miles, converting the goal once is more reliable than converting every workout.
Even splits, and why the plan rarely survives
An even split means every kilometre takes the same time. It is the assumption behind most pacing strategies and the one most runners break, because the first few kilometres feel easy and the last few are downhill from there.
Starting slightly slower than target pace and finishing slightly faster - a negative split - produces a better time for most runners at most distances, because the cost of going out too fast is paid late and in full. The split table here shows the even-split reference, not a prediction of how you will actually run.
Two practical notes on the table: it is capped at thirty rows, so long races are truncated rather than listing every kilometre; and the cumulative column is the total elapsed time, not the split time, which is what a watch displays.
Unit conversion that trips people up
A pace of 5:00 per kilometre is not 8:00 per mile. Miles are longer, so a mile takes more time: roughly 1.609 × the per-kilometre pace. The reverse conversion divides. The familiar shortcuts - multiply by 1.6, or add 60 percent - get you close enough for planning and are still wrong in the last minute.
The other conversion trap is minutes and seconds. A pace of 4:45 is 4.75 minutes in decimal, not 4.45. A finish time calculated as 4.45 × 10 = 44.5 minutes comes out more than four minutes fast.
Where it stops
- No elevation or terrain. A hilly course costs time and the tool does not model it.
- No weather, heat or altitude. All three move pace by minutes over a long race.
- No walk breaks or intervals. The result is one average pace; a run/walk strategy needs its own arithmetic.
- No prediction from another distance. Converting a 10k time to a marathon needs a fatigue model, not a multiplier, and those models have wide error bars.
- Rounded display. Seconds are rounded for reading, so a total can differ from a stopwatch by a second.
Frequently asked questions
How is running pace calculated?
Divide the total time by the distance. Ten kilometres in 50:00 is 5:00 per kilometre, which is about 8:03 per mile.
How do I convert pace per kilometre to pace per mile?
Multiply the per-kilometre pace by 1.609344. A mile is longer than a kilometre, so the mile pace is always the larger number.
How do I find a finish time from a pace?
Multiply the pace by the distance. A half marathon is 21.0975 km, so 5:30 per kilometre gives about 1:56:00.
Why is 4:45 not 4.45 minutes?
Minutes and seconds are base sixty, so 4:45 is 4.75 decimal minutes. Treating it as 4.45 understates a finish time by several minutes over a long race.
What is an even split?
An even split holds the same pace throughout. Many runners do better starting slightly slower and finishing faster, because going out too fast costs more time at the end than it gains at the start.
Does it account for hills or weather?
No. The result is one average pace. Hills, heat, altitude, walk breaks and interval sessions all need their own adjustments.